Summer Starts Here - Save up to 70%
Yakima Q Tower Roof Rack Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado we'll be test fitting the Yakima Round Bar Roof Rack System using the 58 inch crossbars, part number y00409; the Q118 Q-clips for the Yakima Q-Towers, part number y00718 and the Yakima Q-Towers Roof Rack Feet for the naked roof, part number y00124. With our roof rack assembled according to the instructions we'll begin our test fit by opening both front doors. We'll grab our front bar and place it onto the front part of our roof. To ensure that we have this in the correct location we need to measure 11 inches from the leading edge of the windshield to the closest point on our foot pack. We'll do this measurement for both sides of the vehicle to ensure that our feet are in line with each other. Once we have our front bar in place we can use the thumb screw to tighten down our foot pack. more
8/23/2013 1:22:15 PM
Thule Traverse Roof Rack Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado, well be test fitting the Thule Square Load Bar System using part number THLB58 for the 58 inch load bars, part number TH480 for the Thule Traverse Roof Rack Foot Packs and part number THKIT1532 for the Thule Roof Rack Ticket for the Traverse Foot. With our roof rack assembled according to the instructions, well begin our test fit by grabbing our front bar and place it on to the front part of our roof. To ensure that we have this bar in the correct location, we need to measure 11 inches from the leading edge of the wind shield to the closest point on our foot pack. Well do this measurement for both sides of our vehicle to ensure that our feet are in line with each other. Then we can use the included tool to tighten our clamps in place.Once we have both sides of our front bar tighten down, we can then grab our rear bar and place it on to the rear part of our roof. To ensure that we have this bar in the correct location, we need to measure 31-1/2 inches from the center of our front bar to the center of our second bar. more
8/22/2013 11:15:57 AM
Yakima Q Tower Roof Rack Installation - 2008 Chevrolet Silverado- Video
Today, on our 2008 Chevrolet Silverado 3500 series, we'll be testing in the Yakima roof rack system using the round fifty-eight inch crossbars part numbers Y00409 to Q118 Q clips for Yakima Q Towers part number Y00718 and the Yakima Q Tower Roof Rack feat part number Y00124. With our roof rack assembled according to the instructions, we'll begin our test by opening our doors. We'll grab our front bar and place it onto the front part of our roof. To ensure that we have this in the correct location, we need to measure eleven inches from the leading edge of the windshield to the closest point on our FlipPac. We'll do this measurement on both sides of the vehicle to ensure that our feet are in line with each other. Once we have it in place, we can tighten down the screw using our hands or flathead screwdriver. more
8/12/2013 9:09:04 AM
Thule Traverse Roof Rack Installation - 2008 Chevrolet Silverado- Video
Today on our 2008 Chevrolet Silverado 3500 Series, we'll be test fitting the Thule square bar roof rack system using part numbers THLB58, TH480, and THKIT1532. With our roof rack assembled according to the instructions, we'll begin our test fit by opening up our doors. We'll grab our front bar and place it onto the front part of our roof. To ensure that we have this bar in the correct location, we need to measure 11" from the leading edge of the windshield to the closest point on our foot pack. We'll do this measurement on both sides of the vehicle to ensure that our feet are in line with each other. Once we have it set correctly, we can then use the included tool to tighten our clamps to our roof line. more
8/9/2013 12:10:45 PM
Thule Traverse Roof Rack Installation - 2010 Chevrolet Silverado- Video
Today on this 2010 Chevrolet Silverado HD we are going to install a roof rack using part number TH480, the Thule Traverse roof pack foot pack, and THLB58, the load bars, and the fit kit THKIT1532. With this quick review we are going to show you how the Thule roof rack system looks on the vehicle. First off, we will go ahead and spread our towers on our load bars. The distance on our front rack is going to be 45-3/4 inches. And then the back bar will be moved to 45-1/2 inches. OK, let us go ahead and set our first rail on the truck. That will be the one going towards the front. And we are going to measure from the edge of the windshield to the center of the bar. And that measurement is going to be 11 inches. 0:46 more
9/14/2011 5:44:35 AM
Rhino Rack Roof Rack Installation - 2010 Chevrolet Silverado- Video
Today on this 2010 Chevrolet Silverado we are going to install a roof rack from Rhino Rack. We will be using part number DA1375 for the crossbars and it is their elliptical design. And we will also use the pad and clamp kit part number DK227. We have our bars already assembled. We measured out our front rail at 118 millimeters. We measured from here to the inside edge here. And our measurement for our back rail is going to be 109 millimeters. Alright, we have our bars set up. Let us go ahead and start installing the front crossbar. Measure the center of the door jamb to the center of the crossbar. We are going to measure out 9-27/32. 0:38 more
9/7/2011 12:11:00 PM
Rhino Rack Roof Rack Installation - 2010 Chevrolet Silverado DA1375- Video
Today on this 2010 Chevrolet Silverado we are going to install a roof rack from Rhino Rack. We will be using these part numbers: DA1375, the roof rack itself, and the pad and clamp kit part number DK227. This is their heavy duty version of their roof rack. Alright, we measured out the lengths to the dimensions as described in the instructions. The distance on the front one will be 43-21/32 inches. And the rear measurement came out to 42-31/64. We have the roof rack set up. Let us go ahead and start installing the first one. We will work with the one that goes towards the front of the vehicle. Measure from the center of the door jamb to the center of the crossbar. We are going to measure out 9-27/32. 0:44 more
9/5/2011 5:24:44 PM
Filter Videos
Filter Videos
